The shear connectors are the essential element of the Timber-Concrete composite system. With the SFix 2, Elascon currently supplies the strongest shear connector available anywhere on the market.
Elascon SFix 2
Downloading the free-of charge TCC Fibula.
Schneller Einbau der Verbinder mit Schablonen
Complete with Work Schedule and Template
The screw-type Elascon shear connectors SFix 1, 2 or 3 and, depending on the work design, the Elascon hybrid cam, are installed in accordance with the work schedule and the templates provided.
Screw-type shear connectors are screw-turned into position so as to be under tension on one side, i.e., from the middle towards the outside and inclined towards the support.
Faster screw fixing
The patented Elascon shear connector design embodies all the experience and the know how that we have gathered over a period of many years on our various construction sites. Apart from outstanding shear force distribution, our main objective is to minimise the tightening torque levels. The drill tip is exceptionally slim, so that the thread “bites” immediately, even in hard, old timbers.
The tip surface has also been chemically treated, and its corrosion protection finish also provides highly effective lubrication. A special magnetic bit facilitates fast, low-fatigue installation. The installation of the patented hybrid cam also effected systematically with a separate fitting cutter and a conventional lump hammer. All Elascon shear connector types are approved by the official construction supervisory authorities.